Page history
20 July 2023
1 May 2022
29 November 2021
16 November 2021
Jeffythedragonslayer
N9d
m−12
Lidnariq
→0x00 - Info: All ID commands must be three bytes, because of how the SI works
−1
Lidnariq
→0x05 - Write EEPROM Block: busy status reply
+139
Lidnariq
→0x00 - Info: known status bytes
+153
Lidnariq
Add my RTC research
+1,180
27 July 2021
Meeq
→0x07 - Read Real-Time Clock Block
+214
Meeq
→0x05 - Write EEPROM Block: Improve EEPROM write description
+8
Meeq
Add command details for EEPROM and RTC
+5,450
26 July 2021
3 July 2021
9 May 2021
28 February 2021
12 November 2020
Bigbass
Added bold and italics to emphasize checksum vs CRC
m+10
Bigbass
Added pseudocode explaination of the address checksum
+351
Bigbass
Expanded checksum information
+2,151
10 November 2020
18 October 2020
30 September 2020
Bigbass
Added small note that unused bits during communication should not be constantly held LOW.
+182
Bigbass
Added details regarding default state of data pin.
+346
29 September 2020
Bigbass
Added N64 dancepad
+71
Bigbass
Expanded on the command details for command 0x01 and added wavedrom images to show what the data represents.
+751
Bigbass
A few subscripts were changed to superscripts.
mBigbass
Added RX/TX values for read/write GBA commands, and changed superscript notes to numbers instead of dagger symbol.
+463
Ryzee119
Bit 7 details added for Controller State
m+183
20 September 2020
12 September 2020
16 August 2020
8 August 2020
7 August 2020
Bigbass
Added the rest of the known commands. Also added an image and some page links.
+875
Bigbass
Added details about the protocol's operation and started a list of all known and unknown commands.
+2,664